Language: EN | BM |

Setral® PRO-setral-EDK [Spray] Wax-like anticorrosive agent for long-term corrosion protection and for transports overseas/ Multi-Purpose Industrial Lubricant & Maintenance Spray

Setral® PRO-setral-EDK [Spray] Wax-like anticorrosive agent for long-term corrosion protection and for transports overseas/ Multi-Purpose Industrial Lubricant & Maintenance Spray

Share:


Setral® PRO-setral-EDK [Spray] Wax-like anticorrosive agent for long-term corrosion protection and for transports overseas/ Multi-Purpose Industrial Lubricant & Maintenance Spray

Art.Nr. 050518
Application
  • As long-term corrosion protection of metal surfaces like e.g. tools and moulds. Ideal for transports overseas as well as for wire-eroding. Also suitable for indoor and outdoor preservation of aggregates and vehicle parts.

Properties
  • Excellent long-term corrosion protection
  • Forms a transparent, dry-looking, waxy, and oil-free film after solvent evaporation
  • Markings remain visible
  • Extremely water repellent
  • Resistant to seawater
  • Silicone-free
  • Compatible with metals and solvent resistant materials
  • Economical in consumption

Instructions
  • Application by spray can or spraying device onto the dry and degreased surface.
  • Shake well prior to use (spray).
  • Short drying time at room temperature.
  • Thicker layer thickness increases the corrosion protection.
  • Allow solvents to evaporate completely before storage.
  • In many cases the wax should be removed from the treated parts prior to further processing. We recommend CLEAN-setral-AN/U.
  • The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
  • Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
  • Apply product thin and evenly.
Technical Data
Optics white cream-coloured
Basis synthetic wax in solvents
Density,  15°C 0.71 g/cm³ ISO 23581
Viscosity, 40°C (active ingredients) 21 mm²/s ISO 23581
Corrosion test, Kesternich >138 rounds DIN ISO 6270-2AHT
Corrosion test, 100h/50°C 0 DIN 51359
VdF A I In house
Drying time, 20°C <1 min In house
Temperature range -40 - +70 °C

All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
 

Specifications

SKU: can

Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.