Art.Nr. 050526
Application
- Excellent for lubricating and making mechanical elements workable as well as for removing and preserving fretting corrosion on metallic surfaces.
- For corrosion protection, lubricating, cleaning and making mechanical parts working in all areas of application where there is a risk of release into the environment.
- Fine-mechanical drives, measuring tools, sliders, spindles, joints, fittings, chains and ropes, cylinder locks, screw connections, axial face seals etc.
Properties
- Biodegradable: > 85% according to OECD 301 B
- Raw materials are on the LuSC-list (as of TD creation)
- Multifunctional in use
- Reduces friction and energy consumption
- Optimal temporary corrosion protection of metallic surfaces
- Good creeping effect
- Excellent lubricating and passable making of mechanical elements
- Cleans oil and fat from dirty surfaces
- Silicone-free
- Does not contain acid and resin
- Absorbs water residues
- Excellent compatibility with common materials
- Best possible combination of cleaning and thin film lubrication
- Neutral to most plastics and elastomers
Instructions
- Application by spray can or spraying device onto the dry and degreased surface.
- Before storage of tools the cooling bores can be flushed and are thus protected from corrosion.
- Before flushing with pump systems check compatibility with sealings.
- For removal of fretting corrosion, rub in PRO-setral-KS ECO in circular motions with a fiber fleece cloth and wipe off with a cleaning cloth.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
- Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
yellow/orange |
|
| Basis |
ester |
|
| Density, 15°C |
0.88 g/cm³ |
ISO 23581 |
| Viscosity kinematic, 40°C |
5.8 mm²/ss |
ISO 23581 |
| Flash point, COC |
>160 °C |
DIN EN ISO 2592 |
| Copper corrosion (3h/100°C) |
1 |
DIN EN ISO 2160 |
| Steel finger test 168h/20°C with salt water |
No corrosion |
ASTM D 665-B |
| Four ball weld load |
1600 N |
DIN 51350-4 |
| Four ball wear test, 400N/1h |
0.53 mm |
DIN 51350-5 |
| Temperature active ingredient |
-10 - 120 °C |
In house |
| Short term max. temperature |
150 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.
![Setral® PRO-setral-EDK [Spray] Wax-like anticorrosive agent for long-term corrosion protection and for transports overseas/ Multi-Purpose Industrial Lubricant & Maintenance Spray](https://cdn1.npcdn.net/images/3e2b853eb0b5effb995d2e97d1a5798c_1770799986.webp?md5id=5544c080539deb3af63536aecf338234&new_width=1000&new_height=1000&w=1766320008&from=png&type=9 "Setral® PRO-setral-EDK [Spray] Wax-like anticorrosive agent for long-term corrosion protection and for transports overseas/ Multi-Purpose Industrial Lubricant & Maintenance Spray")
