Application
- Especially designed for sliding surfaces in injection moulding tools like ejector pins or guide ways particularly for production of plastic parts and plastic packaging for food and pharmaceutical industry.
- Also suitable for rolling and plain bearings, joints and other sliding pairings in machinery and equipment in the food industry working under high temperatures and high loads.
Properties
- H1 registered
- Kosher certified
- Halal certified
- Tested for sterility (aerobic mesophilic bacteria, yeast and mold) by a microbiology laboratory
- TPPT-free formulation for less labeling
- Prevents microbial growth thanks to special formulation
- Resistant to cold and hot water, alkaline solutions etc.
- Very high wear and corrosion protection, high load carrying ability
- Environmentally friendly; no labelling according to the ordinance on hazardous substances (GefStoffV)
- Compatible with usual plastic and sealing materials
- High adherence on metallic surfaces
- Silicone-free
- Free from animal ingredients
- Free from allergens
Instructions
- Clean and degrease lubrication points carefully prior to application. For this CLEAN-setral-FD is specially suited.
- Follow the instructions of the bearing manufacturer.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
- Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Light Beige |
|
| Basis |
Semi-Synthetic |
|
| Thickener |
Calcium Sulfonate Complex |
|
| Viscosity kinematic, 40°C |
ca. 100 mm2/s |
ISO 23581 |
| Viscosity kinematic, 100°C |
ca. 13 mm2/s |
ISO 23581 |
| Viscosity index |
>100 |
DIN ISO 2909 |
| Consistency number |
2 |
DIN 51818 |
| Penetration,worked 60 strokes |
265-295 1/10mm |
DIN ISO 2137 |
| Dropping point |
>280 °C |
ISO 2176 |
| Copper corrosion,24h/100°C |
1 |
DIN 51811 |
| Steel corrosion (EMCOR, dist. Water) |
0/0 |
DIN 51802 |
| Water resistance, dynamic |
1-80 |
DIN 51807-2 |
| Water resistance, static |
0 – 90 |
DIN 51807-1 |
| Four ball weld load |
>4500 N |
DIN 51350-4 |
| Ndm factor deep groove ball bearing |
500000 mm/min |
In house |
| Ndm factor taper ball bearing |
250000 mm/min |
In house |
| Temperature range |
-25 - +160 °C |
|
| Short term max. temperature |
+180 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.
