Language: EN | BM |

Setral® COVA-setral-SHF 68 FD – High Temperature Fully Synthetic Chain Oil | Food Grade (NSF H1)

Setral® COVA-setral-SHF 68 FD – High Temperature Fully Synthetic Chain Oil | Food Grade (NSF H1)

Share:


Setral® COVA-setral-SHF 68 FD – High Temperature Fully Synthetic Chain Oil | Food Grade (NSF H1)

Application
  • Especially developed for the application in screw compressors.
  • Mainly for applications that are highly demanding for the lubricant.
  • Especially suited for the application in the food and pharmaceutical industry.

Properties
  • H1 registered
  • Manufactured in a production facility certified to ISO 21469 hygiene requirements
  • Without MOSH/MOAH as a formulation component according to EFSA definition and JRC-TR for EU 2017/84
  • Kosher certified
  • Halal certified
  • TPPT-free formulation for less labeling
  • Minimal oil vapor contamination of the compressed air
  • Typically extends the life of filters and separator system
  • Modern additives for ideal wear protection
  • High oxidation stability
  • Compatible with common plastics, elastomers and paints
  • Extended oil change intervals compared to mineral and white oil
  • Free of genetically modified ingredients
  • Miscible with standard mineral oils

Instructions
  • Follow the instructions of the compressor and vacuum pump manufacturer.
  • Do not mix with lubricants on polyglycole base.
  • The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 5 years.
  • Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
Technical Data
Optics Yellow
Basis PAO
Density, 15°C 0.85 g/cm2 ISO 23581
Viscosity kinematic, 40°C 69 mm2/s ISO 23581
Viscosity kinematic, 100°C 10 mm2/s ISO 23581
Viscosity index 154 DIN ISO 2909
Flash point, COC +236 °C DIN EN ISO 2592
Pour point -50°C DIN ISO 3016
Copper corrosion (24th/100°C) 1 DIN EN ISO 2160
Steel corrosion Passed DIN ISO 7120
Four ball weld load 2000 N DIN 51350-4
Four ball wear test, 400N/1h 0.34 mm DIN 51350-5
Temperature range -40 - +140 °C
Short tem max. temperature 150 °C


All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.

 

Specifications

SKU: can

Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.