Art.Nr. 060614
Application
- For the lubrication of piston and rotary compressors. For air and process compressors and vacuum pumps. In all areas where the lubricant has to fulfill extremely high performance standards.
Properties
- Avoids gumming and carbonisation
- TPPT-free formulation for less labeling
- No tendency for foaming
- Less condensate
- Good water separation
- High flash and self-ignition points
- Significant extension of so far common oil change intervals
- Economical in consumption
Instructions
- Refer to recommendations of compressor and vacuum pump manufacturers. Replaces mineral oils acc. to specs. VCL/VDL and TDL.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 5 years.
- Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Yellow/Orange |
|
| Basis |
Ester |
|
| Density, 15 °C |
0.97 g/cm2 |
ISO 23581 |
| Viscosity kinematic, 40 °C |
152 mm2/s |
ISO 23581 |
| Viscosity kinematic, 100 °C |
13.6 mm2/s |
ISO 23581 |
| Viscosity index |
82 |
DIN ISO 2909 |
| Flash point, COC |
280 °C |
DIN EN ISO 2592 |
| Pour point |
-30 °C |
DIN ISO 3016 |
| Foaming characteristic 24 °C |
0/0 |
ASTM D892 |
| Foaming characteristic 93.5 °C |
0/0 |
ASTM D892 |
| Four ball weld load |
1600 N |
DIN 513504 |
| Temperature range |
-30 - + 200 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.
