Tel: +603-6156 4263
Email: info@pensmore.com.my

Oil Free Hitachi Bebicon Compressors Piston Reciprocation Compressor

Oil Free Hitachi Bebicon Compressors Piston Reciprocation Compressor

Share:


Oil Free Hitachi Bebicon Compressors Piston Reciprocation Compressor

How to choose a BEBICON Compressor
  • Select Compressor type according to your requirement.
  • Select necessary pressure and air capacity.
As a reference,necessary pressure should be 0.2 MPa higher than the working pressure in need,and necessary air capacity should be 10 to 20% more than the one in need.(Air capacity indicated in this catalogue is valued at maximum discharge pressure and converted at its inlet condition)
  • Confirm the details of power source(Voltage/Phase/Frequency)
  • Confirm if there is any regulation on noise control.
Note : Make sure to confirm the frequency off power soutce when placing an order.Please notice that oil may emulsify in case of over-intermittent operation for oil-lubricated type.
The above is fr your reference.For specific model selection,contact your nearest dealer or Hitachi local representative office.


BEBICON OIL
Hitachi BEBICON OIL is high-preformance oil which is specially developed for BEBICON compressors.To maximise  Energy-Saving effects,prevent performance degradation and protect BEBICON compressors from trouble or breakdown,it is necessary to use Hitachi genuine BEBICON OIL as the ONLY lubricating oil during maintenance.
Genuine Parts
Hitachi genuine parts must be used when maintaining a Hitachi BEBICON compressor,to keep your compressor from trouble or breakdown.


Features : Oil-Free Air Compressors
High Cooling Head

High Cooling Head with large aluminium alloy ventilated rib improves heat radiation and air capacity.In addtion,V-groove located between discharge and suction chamber reduces the heat transfer from dischatge chamber to suction chamber and improves air capacity.


Lead Air Valve
Lead Air Valve of I-shaped stainless steel on suction side improves air capacity and improves durability against rusting.

Hest Cut Piston Pin & Leak Cut Piston Ring
Heat Cut Piston Pin of heat-insulating material reduces heat transfer from the piston to thr needle bearing and keeps bearing at a relatively low temperature,improving the reliability.
Leak Cut Piston Ring of sepcially shaped abutment joint reduces air leakage and improves air capacity.




Specifications (HORIZONTAL & VERTICAL TANK MOUNT TYPE)
Tank Type Operation Syste Motor Output KW Model Maximum Pressure Mpa     (PSIG) Compressor Speed        min Displacement L/min       (CFM) Capacity at Maximum Pressure L/min (CFM) Air tank Capacity     L Power Source     PH Standard Accessories External Dimensions WxDxH         mm Weight
Horizontal Pressure-switch type 0.75 0.75P-9.5VS 5A 0.93    (135) 990 126(4.5) 80(2.8) 62 1PH   931x376x804 80
0.75P-9.5V 5A 3PH Pressure gauge, Safety valve, 75
1.5 1.5P-9-9.5S 5A 970 257(9.1) 165(5.8) 80 1PH Hose joint, V-Belt, Belt cover, 1,173x418x855 96
1.5P-9.5V 5A 3PH Silencer, Stop valve 1,173x380x855 85
2.2 2.2P-9.5VS 5A 730 386(13.6) 265(9.4) 90 1PH Air outlet 1,283x434x860 147
2.2P-9.5V 5A 3PH 1/4Bx1 for 0.75, 1.5 kW & 1,283x403x860 126
3.7 3.7P-9.5V 5A 1000 541(19.1) 440(15.5) 125 3PH 2.2 kW, 3/8Bx1 for 1,345x428x923 160
5.5 5.5P-9.5V5A 1,080 795(28.1) 630(22.2) 150 3PH 3.7 & 5.5 kW, 1,470x482x932 202
7.5 7.5P-9.5V5A 950 1,027(36.3) 840(29.7) 235 3PH 3/4BX1 for 7.5 & 11kW 1,674x556x1,094 255
11 11P-9.5V5A 1,050 1,546(54.6) 1,200(42.4) 260 3PH   1,793x611x1,098 326
Horizontal 3.7 3.7P-14VH5A 1.37     (199) 900 487((17.2) 400(14.1) 230 3PH Pressure gauge, Safety valve, 1,624x525x1007 223
5.5 5.5P-14VH5A 970 714(25.2) 550(19.4) 230 3PH Hose joint, V-Belt, Belt cover, 1,624x566x1,015 262
7.5 7.5P-14VH5A 900 973(34.3) 760(26.8) 230 3PH Silencer, Stop valve 1,624x590x1,090 295
Vertical 3.7 3.7P-12.5(14)V5A 1.23/1.37 (178/199) 900 487(17.2) 400(14.1) 300 3PH Air Outlet 957x590x1,732 420
5.5 5.5P-12.5(14)V5A 970 714(25.2) 550(19.4) 300 3PH 3/8BX1 for 3.7 & 5.5kW, 1,025x611x1,734 450
7.5 7.5P-12.5(14)V5A 900 973(34.3) 760(26.8) 300 3PH 3/4BX1 for 7.5kW 1,102x634x1,814 480



Specifications (HORIZONTAL TANK MOUNT TYPE)
Operation Systems Motor Output KW Model Maximum Pressure Mpa (PSIG) Compressor Speed        min Displacement L/min(CFM) Capacity at Maximum pressure L/min(CFM) Air tank Capacity L Power Source Standard Accessories External Dimensions WxDxH mm Weight
Pressure-switch Type 0.75 0.75OP-9.5GS5A 0.93(135) 980 139 (4.9) 75(2.6) 80 1PH Pressure gauge,Safety valve,
Hose joint,
V-Belt, Belt
cover, Silencer,
Stop valve
1,173 x 380 x 852 90
0.75OP-9.5G5A 3PH 85
1.5 1.5OP-9.5GS5A 880 278(9.8) 165(5.8) 80 1PH 1,173 x 431 x 897 121
1.5OP-9.5G5A 3PH 1,173 x 393 x 897 110
2.2 2.2OP-9.5GS5A 650 412(14.5) 240(8.5) 90 1PH 1,283 x 434 x 825 150
2.2OP-9.5G5A 3PH 1,283 x 403 x 825 129
3.7 3.7OP-9.5G5A 850 646(22.8) 405(14.3) 125 3PH Air outlet1/4BX1 for 0.75
& 1.5 kW &
2.2kW,
3/8BX1 for 3.7
& 5.5 kW,
3/4BX1 for 7.5
& 11 kW
1,345 x 423 x 913 158
5.5 5.5OP-9.5G5A 860 981(34.6) 605(21.3) 150 3PH 1,470 x 482 x 995 201
7.5 7.50P-8.5GA5A 0.83(120) 915 1,347(47.6) 880(31.1) 235 3PH 1,674 x 552 x 1,045 282
11 11OP-8.5GA5A 900 1,987(70.2) 1,285(45.4) 290 3PH 2,014 x 646 x 1,153 400

Super Oil Free BEBICON LE Series
Motor Output Kw(50Hz) Model Compressor Air Tank Capacity (L) External
Dimensions   W x D   x H
(mm)
Motor Weight (KG)
Max.Pressure Mpa (PSIG) Control Pressure      ON-Off (Mpa) Rotating Speed (min)  Capacity (L/min)
0.4 0.4LE-8S-5A 0.8 (116) O.6 - 0.8 50 Hz 42 20 600x322x608 230V
1PH
30
1360

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.