Tel: +603-6156 4263
Email: info@pensmore.com.my

Pensmore Sdn Bhd
2, Tepi Lot. 2626,
Jalan Perkhidmatan,
Kampung Baru Sungai Buloh,
47000 Sungai Buloh,
Selangor, Malaysia.
+603-6156 4263
+6016-660 3812
h0060166603812

Vaisala Dew Point Meter Dew Point Sensor Desiccant Dew Point Sensor

The DRYCAP story began in the mid-1990s following an unresolved measurement challenge. Traditional humidity instruments were not accurate enough at very low humidities, while commonly used aluminum oxide sensors were prone to drift and required frequent calibration. There was a strong demand for accurate, easy-to-use, cost-effective, and low-maintenance dew point instruments.

Vaisala's solution was to combine the highest quality polymer technology with a patented key feature – auto-calibration – that would eliminate sensor drift in very dry conditions. In 1997, Vaisala introduced a a new type of dew point sensor based on thin-film polymer technology, the DRYCAP® sensor. Since its launch, the DRYCAP product family has grown to encompass a huge range of applications, from drying processes to compressed air and dry chambers. The DRYCAP sensor is particularly renowned for its reliable performance in hot and very dry environments and this highly successful innovation is still going strong today.


https://www.vaisala.com/en/thank-you-download-webinar?asset=https%3A//dreambroker.com/channel/xv75lf0l/0ud3hylk

Dew Point and Pressure Transmitter DPT146

DPT146 for compressed air measurement makes monitoring compressed air simple and convenient. The DPT146 measures both dew point and process pressure simultaneously, and is the ideal choice for anyone using or monitoring compressed air.

Features
The first transmitter that monitors both dew point and process pressure
A simple and convenient transmitter for monitoring of compressed air
Highly accurate humidity information thanks to dew point data coupled with live pressure input
Compatible with the Vaisala Hand-Held DM70 for easy spot-checking, local display and data logging
Pressure: 1 … 12 bar
Dew point: -70 … +30 °C (-94 ... +86 °F)
Digital output RS-485 with MODBUS
Key Benefits
  • 2 measurements in 1
When dew point data is coupled with live pressure input, conversions to atmospheric pressure or ppm are available online, leaving no ambiguity in the information.
  • Accurate and stable
Incorporates the proven DRYCAP and BAROCAP sensor technologies and combines the knowledge of more than 20 years of sensor technology development.
  • Simple and efficient installation
One transmitter providing two measurements means reduced installation costs and a much easier setup.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Dew Point and Temperature Meter Series DMT340

Condensation-resistant DMT340 is designed for industrial low-humidity applications such as industrial dryingcompressed air systemssemiconductor industry, dry rooms, baking ovens, and metal heat treatment to provide accurate and reliable measurement.

Looking for DMT340 performance with interchangeable probes and a transmitter supporting two probes? View Indigo family.

There are several models for different types of needs:

  • DMT341 for wall-mounting, see also DMP7
  • DMT342 with small size flanged probe for use with sampling cell, see also DMP7
  • DMT344 for pressurized processes, see also HMP4
  • DMT347 with small pressure-tight probe, see also DMP7
  • DMT348 for pressurized pipelines, see also DMP8

DMT340 is compatible with the Vaisala DRYCAP® Handheld Dew Point Meter DM70.

Features
Vaisala DRYCAP® sensor provides accurate, reliable measurement with excellent long-term stability and fast response time
Condensation-resistant
Unique auto-calibration feature
Graphical display and keypad for convenient operation
Optional alarm relays and mains power supply module
Integrated data logging with over four years of measurement history
LAN communication option
Traceable calibration (certificate included)
Key Benefits
  • Choose the probe suitable for your needs
Five different probe types designed to meet various requirements.

  • Easy maintenance
The Vaisala DRYCAP® sensor is immune to particulate contamination, water condensation, oil vapor, and most chemicals.

  • Stable measurement
The auto-calibration feature allows the transmitter to perform calibration and adjustment by itself while the measured process is running.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

 

Dew Point and Temperature Probe DMP5

for in-line measurement in high temperature applications <180 °C

Vaisala DRYCAP®  Dew Point and Temperature Probe DMP5 is designed for in-line humidity measurement in industrial drying applications with high temperatures and a wide dew point range. The long and robust steel probe and optional installation flange allow easy installation with adjustable depth to reach through insulation, for example in ovens.

DMP5 incorporates the Vaisala DRYCAP® sensor, which is accurate, reliable, and stable. The sensor is condensation-resistant and immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it dries rapidly and recovers its swift response time. In low-humidity conditions the sensor will auto-calibrate to ensure accurate measurement.

DMP5 is part of the Indigo family and is compatible with the Indigo500 and Indigo200 series transmitters. It can be used with Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.
 

Features
Measures humidity at temperatures up to 180 °C (356 °F)
Wide dew point measurement range -40 ... +100 °C (-40 ... +212 °F) Td
Dew point measurement accuracy up to ± 2 °C ( ± 3.6 °F)
Temperature accuracy up to 0.1 °C (0.18 °F)
Sensor purge provides superior chemical resistance
Withstands condensation, oils, dust and most chemicals
Modbus RTU over RS-485 for flexible connectivity
Compatible with Indigo series transmitters
Includes traceable three-point calibration certificate
Long (two year) calibration interval for easy maintenance
Key Benefits
  • Measure dew point directly in hot processes
DMP5 is built for in-line dew point measurement in hot processes, where dew point can reach levels from -40°C (-40°F) all the way up to 100°C (212°F). The probe measures dew point with ± 2°C accuracy at temperatures of up to 140°C (284°F), but it can operate safely at temperatures up to 180°C (+365°F).

Installation is simple, as the probe can be installed directly in the process. With in-line measurement, there is no need for a sampling system or sample line trace heating.

  • Vaisala DRYCAP® Sensor for accurate and reliable measurements
The Vaisala DRYCAP® sensor is accurate, reliable, and stable. It is condensation-resistant and immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it dries rapidly and recovers. The unique auto-calibration functionality ensures accurate and stable measurement.

The chemical purge function periodically heats the sensor to remove harmful chemicals. This helps to maintain measurement accuracy between calibration intervals in environments with high concentrations of chemicals and cleaning agents.

  • Use standalone or with an Indigo Transmitter
DMP5 is part of the Vaisala Indigo family, so it can also be used with Vaisala Indigo series transmitters. The transmitters offer various additional benefits such as a display for data visualization, easy access to probe configuration, and more extensive options for automation system connectivity, supply voltage, and wiring.

The built-in Modbus RTU over RS-485 output means that the DMP5 can be used as a standalone device and can also be easily integrated into third-party systems.

Whether using the DMP5 on its own or with an Indigo transmitter, it can be connected to the Vaisala Insight PC software for easy field calibration, probe configuration, and device analytics.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Dew Point and Temperature Probe DMP7

for remote installations in tight spaces

Vaisala DRYCAP® Dew Point and Temperature Probe DMP7 is made for tight spaces and low-humidity applications. Its short probe length makes it suitable for installations that have limited space such as semiconductor manufacturing equipment. Other typical applications include industrial drying systems, compressed air systems, and dry rooms.

DMP7 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with the Vaisala Insight PC software for data visualization, easy probe configuration and self-calibration.

Features
Dew point measurement range -70 ... +80 °C (-94 ... +176 °F)
Dew point measurement accuracy up to ±2 °C (±3.6 °F)
Temperature accuracy up to 0.1 °C (0.18 °F)
Sensor purge provides superior chemical resistance
Withstands condensation, oils, dust and most chemicals
Includes traceable three-point calibration certificate
Modbus RTU over RS-485 for flexible connectivity
Compatible with Indigo series transmitters
Long (two-year) calibration interval for easy maintenance
Key Benefits
  • Designed for remote installations in tight spaces​
DMP7 has a short probe length (41 mm / 1.61 inches) that allows it to be used in installations where space is limited. It also comes with a pressure-tight Swagelok® fitting, making it suitable for installations with pressure between 0 ... 10 bar/0 ... 145 psi.
  • Fast reaction time and stability at low dew points
The Vaisala DRYCAP® sensor is immune to particulate contamination, water condensation, oil vapor, and most chemicals. The sensor is condensation resistant and recovers perfectly if exposed to water. Its fast reaction time and dependable stability give it unmatched performance even in dynamic and low dew point applications.
  • Use standalone or with an Indigo Transmitter
Its measurement intelligence and digital Modbus RTU over RS-485 connection within the probe mean that the DMP7 can be used as a standalone device. It can also be easily integrated into other systems.

DMP7 is part of the Vaisala Indigo family, so it can be used with Vaisala Indigo series transmitters. The transmitters offer various additional benefits such as a display for data visualization, easy access to probe configuration, and more extensive options for connectivity, supply voltage, and wiring.

Whether using the DMP7 on its own or with an Indigo transmitter, it can be connected to the free Vaisala Insight software for easy field calibration, probe configuration, and device analytics.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Dew Point and Temperature Probe DMP8

Vaisala DRYCAP® Dew Point and Temperature Probe DMP8 is designed for industrial low-humidity applications with pressure up to 40 bars. Typical applications include industrial drying, compressed air systems, and applications in the semiconductor industry.

DMP8 can be installed in a 1/2'' NPT or ISO thread with adjustable insertion depth. An optional ball-valve installation kit allows the probe to be inserted or detached from a pressurized line.

DMP8 is part of the Indigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with Vaisala Insight PC software for data visualization, easy probe configuration and self-calibration.

Features
Dew point measurement range -70 ... +80 °C (-94 ... +176 °F)
Dew point measurement accuracy up to ±2 °C (±3.6 °F)
Operating pressure 0 ... 4 MPa (0 ... 40 bar)
Temperature accuracy up to 0.1 °C (0.18 °F)
Withstands condensation, oils, dust and most chemicals
Sensor purge provides superior chemical resistance
Includes traceable three-point calibration certificate
Modbus RTU over RS-485 for flexible connectivity
Compatible with Indigo series transmitters
Long (two-year) calibration interval for easy maintenance
Key Benefits
  • Designed for pressurized pipelines
DMP8 is designed to take dew point measurements in pressurized pipelines with low humidity in various industrial applications.

The operating pressure is 0 ... 4 MPa (0 ... 40 bar).

Thanks to its sliding seal, it is easy to adjust the installation depth. When a ball-valve installation kit is used, the probe is easy to insert and remove from pressurized processes.
  • Fast reaction time and stability at low dew points
The Vaisala DRYCAP® sensor is immune to particulate contamination, water condensation, oil vapor, and most chemicals. The sensor is condensation resistant and recovers perfectly if exposed to water. Its fast reaction time gives it unmatched performance even in dynamic and low dew point applications, and its outstanding stability provides a long, two-year calibration interval.
  • Use standalone or with an Indigo Transmitter
DMP8 is part of the Vaisala Indigo family, so it can also be used with Vaisala Indigo series transmitters. The transmitters offer various additional benefits such as a display for data visualization, easy access to probe configuration, and more extensive options for automation system connectivity, supply voltage, and wiring.

Built-in Modbus RTU over RS-485 output means that the DMP8 can be used as a standalone device and can also be easily integrated into third-party systems.

Whether using the DMP8 on its own or with an Indigo transmitter, it can be connected to the Vaisala Insight software for easy field calibration, probe configuration, and device analytics.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Dew Point Meter DMT132

Vaisala HUMICAP® Dewpoint Transmitter DMT132 is an affordable dew point measurement instrument designed to verify the functionality of refrigerant dryers. The probe has excellent long-term stability and it is resistant to compressor oil. It is especially well suited for OEM dryer manufacturers.

The Vaisala HUMICAP® Dewpoint Transmitter DMT132 is designed to verify the functionality of refrigerant dryers. Knowledge of the real dew point, not just refrigerator temperature, ensures high quality compressed air at all times and enables optimization of dryer capacity. It is especially well suited for OEM dryer manufacturers.

Spot-checking is possible with HM70 or DM70 handheld.

Features
High accuracy ±1°C (±1.8°F) in the measurement range of refrigerant dryers
Low power requirements, 10 .... 28 VDC
Optional LED warning light
Optional loop powered display, Nokeval 301
Key Benefits
  • A great match for refrigerant dryers
High accuracy in the measurement range of refrigerant dryers and optimal size.
  • Convenient to use
Low energy needs and optional LED warning light.
 
  • Excellent long-term stability
   
Add Quotation   

Dew Point Probe DMP6

for in-line measurement in very high temperature applications <350 °C

Vaisala DRYCAP® Dew Point and Temperature Probe DMP6 is designed for in-line humidity measurement in industrial drying applications with very high temperatures and a wide dew point range. A high temperature tolerance is achieved using a passive cooling set that conducts heat away from the probe and reduces the temperature to within the optimal range for the sensor.

DMP6 incorporates the Vaisala DRYCAP® sensor, which is accurate, reliable, and stable. The sensor is condensation-resistant and immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it dries rapidly and recovers its swift response time. In low-humidity conditions the sensor will auto-calibrate to ensure accurate measurement.

DMP6 is part of theIndigo family and is compatible with Indigo500 and Indigo200 series transmitters. It can be used with the Vaisala Insight PC software for data visualization, easy probe configuration, and self-calibration.

Features
In-line measurement for humidity at temperatures up to +350 °C (+662 °F)
Dew point measurement range -25 … +100 °C (-13 … +212 °F) Td
Dew point measurement accuracy up to ±2 °C (±3.6 °F)
Sensor purge provides superior chemical resistance
Withstands condensation, oils, dust and most chemicals
Modbus RTU over RS-485 for flexible connectivity
Compatible with Indigo series transmitters
Includes traceable three-point calibration certificate
Long (two-year) calibration interval for easy maintenance
Key Benefits
  • Measure dew point directly in very hot processes
DMP6 is built for in-line dew point measurement in very hot processes, between 100...350 °C (+662 °F). Best measurement performance is achieved at process temperatures between 100 °C and 350 °C. The cooling system has no moving parts, and requires no additional power or cooling utilities, so there is no risk of sensor damage due to mechanical cooling failure.

The installation is simple, as the probe can be directly placed in the process. With in-line measurement, there is no need for a sampling system or sample line trace heating.

  • Vaisala DRYCAP® Sensor for accurate and reliable measurements
The Vaisala DRYCAP® sensor is accurate, reliable and stable. It is condensation-resistant and is immune to particulate contamination, oil vapor, and most chemicals. Sensor warming minimizes the risk of condensation accumulating on the sensor. If the DRYCAP® sensor does get wet, it will rapidly dry and recover from getting wet. Due to the unique auto-calibration functionality accurate and stable measurement is ensured.

The chemical purge involves periodic heating of the sensor to remove harmful chemicals. In environments with high concentrations of chemicals and cleaning agents, it helps to maintain measurement accuracy between calibration intervals.
  • Use standalone or with an Indigo Transmitter
The DMP6 is part of the Vaisala Indigo family, so it can also be used with the Vaisala Indigo series transmitters. The transmitters offer various additional benefits such as display for data visualization, easy access to probe configuration, as well as more extensive options for automation system connectivity, supply voltage and wiring.

Built-in Modbus RTU over RS-485 output means that the DMP6 can be used as a standalone device, and can be easily integrated into third party systems.​

Whether using the DMP6 standalone or with an Indigo transmitter, it can be connected to the Vaisala Insight PC software for easy field calibration, probe configuration and device analytics.​

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Dew Point Transmitter DMT152

The Vaisala DRYCAP® Dewpoint Transmitter DMT152 is designed for measuring low dew point in OEM applications, even down to -80°C. The excellent long-term stability and reliability of its performance is based on the latest DRYCAP® polymer sensor technology. The DMT152 is an ideal choice for industrial applications where it is necessary to control very low humidity. DMT152 is an ideal choice for the semiconductor industry, air and plastics dryers, glove boxes, dry chambers, pure gases, additive manufacturing, high voltage circuit breakers and other applications where it is critical to control humidity with high accuracy. he DMT152 measures accurately and reliably also in the challenging combination of low humidity and hot air, which is typical in plastics drying.

 

Features
Compact and accurate
Vaisala DRYCAP® technology with a polymer sensor
Measures dew point down to -80°C (-112 °F)
Reduced maintenance costs due to long calibration interval
Withstands condensation
Traceable to national standards
Compatible with the Vaisala MI70 indicator, optional loop powered display, Nokeval 301
Key Benefits
  • Convenient
Stable measurement enable long calibration intervals and reduced maintenance costs
  • Optimal for very low humidity applications
The DRYCAP® Dewpoint Transmitter DMT152 was specifically designed to provide reliable and accurate low dew point measurements in OEM applications, even down to -80°C.
  • Robust
   
Add Quotation   

Dew Point Transmitters DMT345 and DMT346

The Vaisala DRYCAP® Dewpoint Transmitters DMT345 and DMT346 are designed for humidity measurement in industrial drying applications with particularly high temperatures. The high temperature tolerance of the sensor allows direct measurement from hot process without the need for a sampling system and sample conditioning. The wide dynamic rage of the measurement in DMT345 and DMT346 is unique: Measurements can be made from -40 °C frost point up to +100 °C dew point, with dry-bulb temperatures ranging up to 350 °C.

Both transmitters incorporate the Vaisala DRYCAP® sensor, which is accurate, reliable, and stable. The sensor is condensation-resistant and is immune to particulate contamination, oil vapor, and most chemicals. The DRYCAP® sensor is notable for its swift response time and rapid recovery after getting wet.

Looking for DMT345 and DMT346 performance with interchangeable probes and a transmitter supporting two probes? View Indigo family and also DMP5 and DMP6.
 

Key Benefits
  • Reliable in very hot processes
The cooling system has no moving parts and requires no additional power or cooling utilities, so there is no risk of sensor damage due to mechanical cooling failure.
  • Wide dynamic range
The unique combination of the dew/frost point temperature measurement range from -40 to +100 °C and operating temperature up to 350 °C makes the sensor suitable for hot and dynamic processes with wide temperature and humidity range.
  • Convenient operation
Graphical display of measurement data and trends with a multilingual menu and keypad allows users to easily monitor operational data, measurement trends, and access measurement history for the past 12 months.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Handheld Dewpoint Meter DM70

Handheld Dewpoint Meter DM70 for spot-checking applications and field calibration offers accurate and fast measurement for industrial dew point applications, such as compressed air, metal treatment, additive manufacturing as well as food and plastics drying.

DM70 measures dew point temperature accurately over a wide measurement range. The probe may be inserted directly into pressurized processes, and it responds rapidly from ambient to process conditions. The sensor withstands condensation and fully recovers from getting wet. The DM70 can also be used as a tool for reading the output of fixed Vaisala dew point transmitters, like the DMT132DMT143 & DMT143LDMT152, and DMT340.

The optional MI70 Link Windows® software in combination with a USB connection cable is used to transfer logged data and real time measurement data from the DM70 to a PC.

Download free MI70 Link Windows® software here.

Where direct measurement is difficult, the DM70 can be used with Vaisala's sampling cells, or with Vaisala DRYCAP Portable Sampling System DSS70A.

The DM70 includes an MI70 indicator and one of the following probe options for different dew point temperatures:

DMP74A -40...+60°C Td
DMP74B -60...+20°C Td
DMP74C -50...+20°C Td (for SF6 gas)

Features
Vaisala DRYCAP sensor with unique autocalibration function
Three models, accurate measurement ranges from -60°C...+60°C (-76°F...+140°F)
Data can be logged and transferred to a PC via MI70 Link software
Multiprobe operation; relative humidity and CO2 probes can also be connected to the MI70 indicator
Traceable calibration to national standards (certificate included)
Key Benefits
  • Get data quickly
Fast response time enhanced by sensor purge function ensures quick and accurate data.
  • Reliable measurements
The sensor withstands condensation and fully recovers from getting wet.
  • Intuitive user interface
Easy-to-use user interface, a clear graphical LCD display, and data-logging capability.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

Miniature Dew Point Transmitters DMT143 & DMT143L (Long)

Miniature size dew point transmitters DMT143 and DMT143L are ideal choices when you want to measure dew point accurately in small compressed air dryers, plastic dryers, additive manufacturing and other OEM applications. They are easy to integrate and can be used in Vaisala handheld meter DM70. The long version has replaced the DMT242.

Features
Vaisala DRYCAP® technology with auto-calibration
Fast response time 
Dew point measurement range -70 ... +60 °C (-94 ... +140 °F)
Accuracy ±2 ºC (±3.6 ºF)
Withstands condensation
Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70
Traceable calibration (certificate included)
LED alarm for exceeded dew point level
Key Benefits
  • Convenient size
Miniature size dew point probes for e.g. small industrial dryer applications.
  • Low maintenance costs
Stable measurement enables long calibration intervals saving maintenance costs.
  • Easy to use
   
Add Quotation   

Multiparameter Transmitter DPT145

Innovative. That’s DPT145. Our uniquely capable Multiparameter Transmitter for SF6 gas opens for you the world of online measurement of dew point, pressure, and temperature. It also calculates four other values, including SF6 density. 

Integratable. That’s DPT145. It’s especially well-suited for integration into OEM systems, please contact us to discuss opportunities further.

Features
Measured parameters: dew point, pressure, temperature
Calculated parameters: SF6 density, normalized pressure, dew point in atmospheric pressure, ppm
Digital output: RS-485 with MODBUS
Key Benefits
  • Risk-free, greener solution
Online monitoring of gas trends via data collection means there’s no sampling — and no risk of releasing SF6 gas up in the air.
  • Cost-efficiency
Save time and money across the board, from investment and installation to operation and servicing.
  • Easy maintenance
No frequent calibration is needed.

https://www.vaisala.com/en/thank-you-download-asset?asset=https://www.vaisala.com/system/files/documents/VIM-G-IND-Compressed-air-eGuide-B211820EN.pdf
   
Add Quotation   

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start