Tel: +603-6156 4263

Pensmore Sdn Bhd
2, Tepi Lot. 2626,
Jalan Perkhidmatan,
Kampung Baru Sungai Buloh,
47000 Sungai Buloh,
Selangor, Malaysia.
+603-6156 4263
+6016-660 3812

Food Grade Air Compressor Oil Kluber Oil Lubcon Oil


Remove internal waste Pro-long running life
Apureda UC-R205 flushing oil is for screw air compressor internal cleaning.
It can remove compressor internal oil mud and carbon deposit.Meanwhile, 
the metal part of compressor will be protected by the oil film.

items Test Method Performance
Density (Kg/m3) ASTM D1298 0.91
Running Viscosity (mm2/s) ASTM D445 145
Flash point (°C) ASTM D92 180

    How to use
  • The flushing oil is 3%-5% according to the compressor lubricant.That is, if the compressor lubricant is 100 liters, the flushing oil needs 3 to 5 liters.
  • Aadd flushing oil into the compressor directly and run at least 24 hours.
  • Disvharge used lubricant and flushing oil, then add new compressor lubricant.
​    Caution
  • Please adjust the volume as per the carbon deposit level and monitor the cleaning process.We recommend you to ask professionals to do it.
  • Please discharge all lubricants while the oil is heat to avoid precipitate.
  • Do not recommend PEG and PET compressor oil to use it.

Apureda US825 Protary Fluid

UG422 Lubricant

UD218 Lubricant

Add QuotationAdd QuotationAdd QuotationAdd Quotation

Water scale flushing oil UC-W205

Remove water scale,
keep machine smooth

Apureda UC-W205 water scale flusshing oil can remove the wawter scale, rust
and foreign substance, which will improve cooling efficiency.Special formula
will protect the metal, cooper and stainless steel materials.

  • Suitable for heat exxchange, ccooling towers & machine and water pipe systems.
  • It is safe and do not corrode metal.
  • Remove water scale quickly. Normally, several hours will remove the foreign substance.
  • It can dilute to use according to the machine status which will save cost.
​       Caution
  • If it enters the eye accidentally, please wash it withflushing water and go too the hospital for treatment.
  • the original liquid has irritating effect on the skin.Please wear protective quipment while using it.



Specific gravity

Carbon Deposit Flushing oil UC-V205

Remove carbon deposit thoroughly,
Heat dissipation efficiently

Apureda UC-V205 is higher efficiently flushing oil ehich does not need heat
and stir vefore using. It has strong penetration force to wash the carbon
deposit without labor and foreign force. It also washes the small parts gap 
and does not damage the machine precision.

  • Strong penetration and peel force can remove carbon deposit and oil mud efficiently.
  • Wash compressor host nachine, oil pipe and heat exchange cerbon deposit quickly.
  • Use eassilly, just immerse for 20minutes to 2 hours as per the dirt level.
  • Do not corrode metal parts.
  • One time can wash different parts and can repeat to use it.
  • If it enters the eye accidentally, please wash it with flushing water and go to the hospital for treatment.
  • The original liquid has irritating effect on the skin.Please wear protective equiipment while using it.

appearance color
smell Special solvent smell
status Two layer liquid

Add QuotationAdd Quotation  

S6 Dow Chemical

With 5 years effort,
Fortune global 500 Dow Chemical developed screw air compresor innovated lubricant.
UconTM Air Compressor Lubricant S-6 is based on the PAG oil of Dow Chemical with other lubricants advantages to develop reliable
and compatible aynthetic oil.
Ac S-6 lubricant is free of macro-molecule during running.Then carbon deposit coking will be decreased.

Restrain coking and carbon deposit

Dow Chemical S6 compressor synthetic lubricant
is special fluid, it can effectively restrain and removve precipitate
to protect the machine well. Then it will avoid coking and
carbon deposit during running.


Longer service life

The air release property of S6 synthetic
lubricant is less than one minute, which will
decrease the contact time & area with air. Then
it will improve the machine heat and lubrication
efficiency to avoid hhigh temperature oxidation


Lower maintance cost

  • Cooler
- Increase cooling efficiency
- Prolong lubricant service life
- Restrain lubricant temperature increase
- Decrease cooling loading & air consumption
  • Air end screw
- Increase screw lubrication efficiency
- Decrease screw film enery consumption
  • Air oil separator
​- Prolong separator service life
Decrease separator block & high pressure drop

Typical Property

Test item Test method S-6
Appearance Visualization Limpidness
Viscosity at 40°C ASTM D445 45.82
Viscosity at 100°C ASTM D445 7.64
Viscosity index ASTM D2270 133
Pour point °C ASTM D97 -35
Flash Point (COC), °C ASTM D92 245
Water Separation Properties ASTM D1401 10
Acid number , mg KOH/g ASTM D664 0.13
Bubble properties 93.5°C ASTM D892 5/0
Density g/ml, 25°C ASTM D941 0.856




Dow is a diversified chemical company that uses the power of science and technology to continuously innovate and create a better life for humanity.The company promotes innovation and value creation through the organic combination of chemistry, physics and biological sciences, and strives to solve many challenges in today's world.With its integration, market-driven, industry-leading spencialty chemistry,, high-tech materials, agricultural science and plastics, etc.
Dow Lubricants has experienced more than 70 years of continuous innovation and practical applications,
and has accelerrated product development in Chian, the Asia-Pacific region, and other parts of the world in recent years.More than 500 top scientists and engineers, mre than 80 comprehensive laboratories, professional R & D technology and market-oriented application development capabilities have brought advanced lubrication industry.In addition, Dow's unique Customer Innovation Centre, where Dow researchers and customers work closely to turn market opportunitiese and novel ideas into profitable solutions.

No oil residue or paint film

PAG-based synthetic turbine fluid can effectively prevent the servo valve from sticking due to the accumulation of paint film and the turbine unit to stop, thereby avoiding unplanned maintenance costs..

Reduce the chance of micro-ignition

PAG-based synthetic turbine fluids reduce the formation of entrained air bubbles that cause micro auto-ignition effects.

Reduce electrostatic discharge

Compared with petroleum-based turbine oil, PAG-based synthetic turbine fluids have higher heat transfer efficiency, lower friction coefficient, andd cana reduce the accurrence of electrostatic discharge.

Hydrolytic stability

PAG-based synthetic turbine fluids do not decompose or chemically react with water, which can minimize oil degradation andd acid formation, thereby avoiding damage to equipment.

Test item Test method Test results
Appearance Visually Limpidness
Viscosity at 40°C ASTM D445 26.23
Viscosity at 100°C ASTM D445 5.19
Viscosity index ASTM D2270 132
Density, g/ml,25°C ASTM D941 0.985
Pour point,°C ASTM D97 -48
Flash point (COC) ASTM D92 242
Copper sheet corrosion test ASTM D130 1a
Salt water corrosion test ASTM D665A PASS
Specific heat@40°C,j/g°K ASTM E1269 2.017
Thermal conductivity,@40°C
(140°F),watts / m°K
PLTL-73 0.145


Add QuotationAdd Quotation  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)