Art.Nr. 050554
Application
- For residue-free cleaning and degreasing of bearings, machine parts and injection moulds/tools. Also suited for warm tools.
- Removal of grease, oil, resin, dirt and remains of sealings.
- Typical applications: injection molding, food and pharmaceutical industry, engineering and plant equipment, automotive industy etc.
Note: This high-performance cleaner can be used for applications where technically inevitable contact with food or food packiging may occur.
Properties
- H1 registered
- Manufactured in a production facility certified to ISO 21469 hygiene requirements
- Kosher certified
- Halal certified
- Cleans quickly and efficiently
- Evaporates fast and without residues
- Guarantees absolutely clean surfaces
- Compatible with common plastic materials
- Agreeable odour
- Economical in consumption
Instructions
- Please read the corresponding material safety data sheet carefully.
- Spray generously on the parts to be treated.
- If parts are heavily soiled, repeat the cleaning process.
- Test paints and plastics on compatibility.
- Do not use under voltage in the electronics sector.
- Wait until solvents evaporated, as otherwise fire risk exists.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
- Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Colourless |
|
| Basis |
Solvents |
|
| Evaporation number |
19 (Ether= 1) |
In house |
| Temperature range |
-5 - + 50 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Maaf, buat masa ini tiada video yang dimuat naik.
Maaf, buat masa ini tiada fail untuk dimuat turun.